1. Cavity layout. Determine the number of cavities and their arrangement according to the geometric structure characteristics of the plastic parts, dimensional accuracy requirements, batch size, mold manufacturing difficulty, mold cost, etc.

2. Determine the parting surface. The position of the Plastic furniture mould parting surface should be conducive to mold processing, venting, demolding and molding operations, and the surface quality of plastic parts.

3. Determine the pouring system (the shape, location and size of the main runner, sub-runner and gate) and exhaust system (exhaust method, exhaust slot location, size).

4. Select the ejection method (ejector, pipe, push plate, combined ejector), determine the undercut treatment method and core pulling method.

5. Determine the cooling and heating method, the shape and location of the heating and cooling groove, and the installation location of the heating element.

6. According to mold material, strength calculation or empirical data, determine the thickness and dimensions of mold parts, shape structure and all connections, positioning, and guide positions.

7. Determine the structural form of the main forming parts and structural parts.

8. Consider the strength of each part of the mold and calculate the working size of the molded part.

If these problems are solved, the structure of the mold will naturally be solved. At this time, you should start to draw the mold structure sketch to prepare for the formal drawing.

Megosztás a facebookon

Plastic trash can molds have very high requirements. Generally, environmental protection PP materials are mostly used, which can produce a bright surface and then do film printing and other treatments. It becomes a high-end trash can, but it is not necessary to make a good trash can. Easy. First of all, the quality of the mold must be controlled, including mold design, mold assembly, hot runner and cold runner selection, etc. As the saying goes, laymen watch the excitement, and experts watch the doorway. Annoy mold tells you how to better control plastic Problems in the mold processing process?

Mold asseFactory Custom newly design Plastic Injection dustbin Mould (JTP-A0119)mbly is just like assembling a machine. Every component and every screw cannot be wrong, otherwise the consequences will be very serious, from the slightest to the product defect, affecting the production, and the other to completely damaging the mold and causing scrap. Therefore, the assembly work must be very meticulous. During the assembly process, pay attention to the cleaning of the mold, especially the waterway and screw holes. The iron filings must be blown out, otherwise the customer will be very angry and the consequences will be very serious.

Megosztás a facebookon